Copper to Fiber Gigabit Meida Converter

Enhanced Smart Management Features

The Pro-optics-DU-1000 or Pro-optics-WDM-1000 series provides auto MDI/MDI-X on its TP port and the DIP switch to configure the Link Fault Pass through function (LFP). The LFP function includes the Link Loss Carry Forward (LLCF)/Link Loss Return (LLR). LLCF/LLR can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the net. The DIP switch can disable or enable the LFP function. The LLCF means when a device connected to the converter and the TP line loses the link, the converter’s fiber will disconnect the link of transmission.  and The DIP also can support 9K jumbo frame. 

Easy Installation

The Pro-optics-DU-1000 or Pro-optics-WDM-1000  series support Pro-optics-MC-R14 2U Chassis. this media converter with media converter ear can plug into Pro-optics-LINK 14 slots media converter chassis.

 Complies with IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX, IEEE 802.3ab 1000BASE-T, IEEE 802.3z 1000BASE-SX/LX
TP port supports 10/100/1000BASE-T auto-negotiation and auto-MDI/MDI-X
 1000BASE-SX: 50/125μm or 62.5/125μm multi-mode fiber cable, up to 220/550m (GT-802)
 1000BASE-LX: 9/125μm single-mode cable provides long distance for 10km (GT-802S)
 1000BASE-LX WDM interface for up to 15km (single-mode fiber 9μm/125μm) on GT-806A15/B15
 1000BASE-LX WDM interface for up to 60km (single-mode fiber 9μm/125μm) on GT-806A60/B60
 1000BASE-T: 2-pair Cat. 5/5e/6 UTP cable, up to 100 meters
 Layer 2 key Features
- IEEE 802.3x full-duplex flow-control and back-pressure in half-duplex eliminate the loss of packets 
- Supports auto MDI/MDI-X function 
- Store-and-Forward mechanism
- Non-blocking full wire-speed forwarding rate 
 Media conversion between 10/100/1000BASE-T and 1000BASE-SX/LX
 Fiber media allows
- Multi-mode fiber using SC/LC/WDM connector
- Single-mode fiber using SC/LC/WDM connector
 Compact size for working with Pro-optics-LINK MC family media chassis (Pro-optics-MC-R14)
 Wall-mountable design
 LED indicators for easy network diagnostics
 Provides DIP switch for LFP function (Disable/Enable) setting
 OAM TS-1000 supported
 9K Jumbo Frame Supported
 Choice of fiber-connector from SC, LC and WDM, multi-mode/single-mode fiber for 1000Base SFP interface
 Compact in size, easy installation